How To Clean Melted Paper Onto Plastic

Chrissy said, "Brand new football preparation jacket (my partners) 100% polyester. Accidentally flicked the cooker switch for a min and the jacket still in his shopping pocketbook was on top. I have picked off the bits I tin and fabric isn't damaged underneath, only the Hardee's parts are coming of in 1/2 mm $.25 with tweezers seems impossible using that method. What solvent can I employ to melt plastic bag (one of the quality shiney thick one) but not affect polyester glaze? It'south a new Tottenham jacket and he's so cross with me cause it was and so expensive. Practise I need to salve upward for a new one? :("

Plastic bags melt at a very low temperatures and quickly absurd, which lets them adhere to whatsoever surface they bear on while melting. Nonetheless, removing them from some fabrics can be surprisingly easy. You lot may be able to simply peel the plastic off of the fibers, merely if not or if you take a lot of plastic to remove, use the method below.

You Will Need:

Brown paper bag
An iron or hair dryer

Steps to Remove the Plastic:

Get a dark-brown newspaper purse or two pieces of any other kind of brown paper, such as kraft newspaper. Do not employ any kind of paper other than brown. Do not apply paper that has ink on it either, as the ink can transfer to the fabric.
Get outside or to a well ventilated area with the supplies and damaged fabric particular.
Turn the iron on to the lowest rut setting. A hair dryer can exist used instead if needed.
Lay the fabric particular out flat.
Lay the bag or pieces of brown newspaper over the melted plastic area.
Rub the warm iron over the newspaper. Do not allow the iron become over the edges of the paper or y'all could damage the fabric. This is peculiarly true for polyester and nylon fabrics. If using a hair dryer instead of an iron, hold the pilus dryer near six inches away from the paper, moving information technology around to estrus the entire area where the plastic is located.
Gently move the iron over the area until the plastic melts. Practice not apply pressure as yous do not desire to force the melted plastic deeper into the fibers of the textile.
The paper will blot and attach to the plastic. Once the plastic has melted, peel off the paper and the melted plastic will pare off along with it.
If there is whatsoever excess, scrape it off while information technology is all the same warm with a plastic scraper, spoon, or dull pocketknife. Practice not touch the melted/warm plastic with your manus.
One time all of the plastic is removed, clean the particular as usual.

Additional Tips:

If y'all allow the hot iron to go over the edges of the newspaper on polyester fabric, you could cease up with shiny iron marks. It is all-time to avert this outcome if at all possible, but if this happens, use the guide How to Remove Shiny Fe Spots from Polyester.
Be especially careful with nylon fabrics or nylon blend fabrics, every bit nylon also can melt at very low temperatures. Utilise simply the minimum amount of oestrus necessary to melt the plastic.